If you are getting new siding in Miami Gardens, you will probably hear the letters NOA. It stands for Notice of Acceptance, Miami-Dade County's product approval document, and it is one of the things a building department looks for before it signs off a job. You do not need to read engineering reports to use one. A few minutes with the county's search tool tells you whether the product on your quote is approved and how it has to be installed.

What a Notice of Acceptance is

Miami-Dade County's Product Control Section receives applications for product approval, reviews the testing and technical documents, and approves or denies building materials. Its own page says it mainly addresses windows, exterior glazing, wall cladding, roofing, exterior doors, siding and shutters, which puts siding squarely in its scope.

An approved product gets an NOA, a numbered document stating that the product meets the Florida Building Code, including the requirements for the High-Velocity Hurricane Zone that covers Miami-Dade and Broward counties.

Why it matters in Miami Gardens

Miami Gardens is in Miami-Dade County, inside that hurricane zone. Siding here has to stand up to higher wind loads than in most of the country, and products sold nationwide are not automatically approved for use here.

Florida also runs a statewide product approval system through the Florida Building Commission, with its own approval numbers. Some products carry both. Whether your city accepts a statewide approval for this zone, or wants the Miami-Dade NOA, is a question for the City of Miami Gardens building department, and it is worth asking before materials are ordered.

How to look up a product

The county keeps a free Product Control Search. Two ways to use it:

  • If you have the NOA number from your quote, enter it in the file number search. Numbers follow a pattern of year, month and sequence, such as 01-0712.04.
  • If you only know the manufacturer, use the advanced search and filter by applicant, category and material to find their current approvals.

What to check on the NOA

Open the document itself and look for these details:

  • The product name and description match what is on your quote, including the profile.
  • The expiration date. NOAs state that they are not valid after their expiration date, so an expired one does not count.
  • Any limits on the design pressure, wall height, substrate or sheathing the product can be installed over.
  • The labelling requirement, which tells you what should be printed on the product or its packaging.
  • The installation details or drawings the approval relies on.

Approval covers an installation, not just a product

An NOA approves the product as described in the document, which includes how it is fastened and what it is fastened to. If the installer uses a different nail, a wider spacing or a substrate the approval does not list, the approval no longer describes your wall.

That is why it helps to compare the approval with what you actually see going up. You do not need to measure every nail. Ask the installer to show you the fastening pattern from the approval and how they are following it.

Look at the label on site

NOAs typically require each unit to carry a label with the manufacturer's name and a statement that the product is approved by Miami-Dade County Product Control. The county's published NOAs set out the exact wording each one requires. When the material is delivered, a quick look at the cartons confirms that what arrived is what was approved. If the cartons are unmarked, or the label names a different product, ask before the first panel goes up.

Keep a copy of the NOA with your house records too. It is useful when you sell, when you file an insurance claim after a storm, and when you need matching material for a repair years from now.

Red flags

Ask more questions if you hear any of these:

  • The installer cannot give you an approval number for the product.
  • The number they give does not match the product name in the search.
  • The approval has expired or is for a different profile.
  • You are told approval only matters for windows and roofs.

Where the permit fits in

In most cases the product approval is submitted with the permit application, and the inspector checks the work against it. The building department that serves your address decides exactly what it needs, so confirm the current requirements with the City of Miami Gardens before you start. That one call can save a failed inspection later.

Next steps for a Miami Gardens home

For more on siding in the city, including housing, climate and typical costs, see our Miami Gardens siding contractor page. If you are choosing between materials, the fiber cement siding and vinyl siding pages explain how each is installed for high winds.